Stompbox 2011

From CCRMA Wiki
Revision as of 11:47, 21 July 2011 by Esteban (Talk | contribs) (→‎COURSE SCHEDULE)

Jump to: navigation, search

Stompbox Design Workshop

CCRMA Summer Workshop 2011
July 18-22

Instructors: Edgar Berdahl eberdahl@ccrma.stanford.edu and Esteban Maestre esteban@ccrma.Stanford.EDU

WorkshopFXPixSmall.jpg


COURSE HISTORY AND DESCRIPTION

Description: Come design your own flavor of stompbox at Stanford Universityʼs Stompbox Design workshop. We will teach you a brand new platform for implementing stompboxes that not only enables you to create any sound effects from the past but also promotes the creation of new sound effects. Our resources for new media design are also at your fingertips if you would like to re-design the concept of a guitar stompbox: for example, put a Wiimote on your guitar and use it to change the sound of the effect, or use some LEDs to simulate the glow of vacuum tubes or fire, or even incorporate a micro-sized Pico projector into your stompbox! The expanded world of digital audio effects is at your fingertips because the workshop incorporates:

  • Most basic theory of signal processing
  • Description of operation of prior stompboxes and digital audio effects
  • Laboratory exercise teaching you how to program our own open-source software and hardware platform involving:
    • connecting to your stompbox over an Ethernet connection from your laptop
    • creating new digital audio effects by connecting together basic building blocks in the graphical
    • programming language Pure Data
    • building simple button and knob interfaces to Pure Data
    • How to program digital audio effects in C++ and/or Faust
  • Introduction to human-computer interface devices for projects

Further discussion of open-source hardware and software platforms including Satellite CCRMA. Finally, we will round out the workshop with a roundtable presentation of the stompboxes you create followed by an optional evening jam session for fun.

This workshop is intended for: Musicians interested in exploring new possibilities in digital audio effects in a hands-on and technical way; Makers, engineers, computer scientists, or product designers interested in exploring artistic outlets for their talents and collaborating with musicians; and/or anyone looking to gain valuable skills in basic audio signal processing and human-computer interfaces, with a focus on invention. Participants are encouraged (but by no means required) to bring their own laptop computers and/or musical instruments.

This workshop was created by Edgar Berdahl and Esteban Maestre in 2011. This workshop uses very similar hardware to the New Music Controllers workshop, but the focus is more on applications to stompbox design and audio signal processing.

How to sign up for the workshop!

COURSE SCHEDULE

We will meet from 9am-5:00pm daily, with mini-breaks at 10:30 and 3:00, and a lunch break from 12-1.

The Week
Date Morning (9am-12noon) Afternoon (1:00pm-5:00pm)
Monday Introduction, Overview, Pd basics lecture (incl. one digital effect example), Kit How-To, Lab 0: Making Sound With Pd Review Lab 0, FX Lecture 1, Lab 1: Making FX In Pd
Tuesday Review Lab 1, FX Lecture 2, Introduction to Electronics--Sensors1 Lab 2: Controlling an Effect with Real Sensors
Wednesday Lab 2 Review, Interfacing With The Rest Of The World (i.e. making cables, etc.) Abel Guest lecture, Discuss project ideas, Optional guided laboratory time or start on project
Thursday FX Lecture 3, Refine project ideas, Work on project, Discuss enclosures J. Abel Guest lecture, Special topics, Work on project
Friday Work on project Project presentations 3-4:30PM

FX Basics LECTURES

MONDAY:

Lectures:

Fx Basics 1: Introduction

Fx Basics 2: Dynamics Effects

Demo patches:

http://ccrma.stanford.edu/~esteban/stompbox/00_stomp_dynamics_1.pd (Boost)

http://ccrma.stanford.edu/~esteban/stompbox/01_stomp_dynamics_2.pd (Tremolo)

http://ccrma.stanford.edu/~esteban/stompbox/02_stomp_dynamics_3.pd (Noise gate]

http://ccrma.stanford.edu/~esteban/stompbox/03_stomp_dynamics_4.pd (Compressor)

Remember that the graphical displays (i.e. the [table] objects) will cause the BeagleBoard to go very slow. So it's good to remove them (together with the corresponding [tabwrite~] objects)!


TUESDAY:

Lecture:

Fx Basics 3: Filtering

Demo patches:

http://ccrma.stanford.edu/~esteban/stompbox/04_stomp_filtering_1.pd (Biquad block example)

http://ccrma.stanford.edu/~esteban/stompbox/05_stomp_filtering_2.pd (Wah example)

Lab resources:

Categorized list of Pd Objects (on a single page here)

solo_man.wav


WEDNESDAY:

Lecture:

Fx Basics 4: Distortion

Demo patch:

http://ccrma.stanford.edu/~esteban/stompbox/06_stomp_distortion.pd (Distortion / Fuzz)


THURSDAY:

Lecture:

Fx Basics 5: Time Effects

Demo patches for Delay and Flanger Effects:

http://ccrma.stanford.edu/~esteban/stompbox/07_stomp_time_1.pd (Simple delay)

http://ccrma.stanford.edu/~esteban/stompbox/08_stomp_time_2.pd (Simple tapped delay)

http://ccrma.stanford.edu/~esteban/stompbox/09_stomp_time_3.pd (Feedback Delay)

http://ccrma.stanford.edu/~esteban/stompbox/10_stomp_time_4.pd (Flanger)


FRIDAY:

WORKSHOP PROJECT

One of the goals of this workshop is to help you get hands-on experience building a novel stompbox project of your choosing. You are encouraged to work with other workshop participants on the project, particularly those who might have skills that complement your own. Since the workshop is short, it is a good idea to start thinking of ideas during the first lectures and labs; during the second half of the workshop, you will primarily be working on getting a "demo-able" prototype ready for the project presentations on Friday afternoon.



RELATED LECTURES

LABS

(see links in course schedule)

SOFTWARE

  • The lectures will primarily be in Pure Data (Pd) Extended for sound synthesis. We will introduce some other alternatives such as writing plug-ins directly in C/C++ or with Faust.
  • The micro SDHC card for your kit will be initialized with Satellite CCRMA so that you can get up and running instantly.
  • The Beagle Board platform enables linux to be run on a high-power 720MHz CPU. It can execute floating point operations natively, which is essential for rapid prototyping of audio algorithms.
  • The Arduino software could be used to change the Firmata-based firmware that gets data from the Arduino Nano board into Pd.

REFERENCES

SatelliteCCRMALogoVSmall.jpg

FAQ

Project questions

  • Can I do ____ for my project?

You can do whatever you would like for your project. Keep in mind that you really only have a few days to work on it, so you might want to focus on one crucial aspect of a larger project that you'd like to have working.

  • Can I incorporate my own hardware and software into my project?

Yes, you can, although we have limited time and ability to support hardware and software other than what is introduced in the labs.

  • Can I keep the tools we use during the workshop?

If you buy the kit!




StompboxFlyer2011JPG.jpg

Retrieved from "https://cm-wiki.stanford.edu/mediawiki/index.php?title=Stompbox_2011&oldid=12186"