Difference between revisions of "Satellite CCRMA (Beta Release)"
From CCRMA Wiki
m (moved Satellite CCRMA Beta to Satellite CCRMA (Beta Release): fix title) |
|||
| Line 1: | Line 1: | ||
| + | == Required Hardware == | ||
| + | * [http://beagleboard.org/hardware-xM Beagleboard-xM Rev B] | ||
| + | * 4GB SD card or larger (To write the Satellite CCRMA software image to the SD card, please see [https://ccrma.stanford.edu/wiki/Satellite_CCRMA_(Alpha_Release)#Appendix:_Writing_the_Image_to_an_SD_Card the relevant Appendix below].) | ||
| + | * One GT Max adjustable-length USB cable | ||
| + | |||
| + | * Ethernet cable | ||
| + | |||
| + | * '''2A''' 5V switching power adaptor | ||
| + | |||
| + | * [http://www.arduino.cc/en/Main/ArduinoBoardNano Arduino Nano] | ||
| + | |||
| + | * Solderless breadboard | ||
| + | |||
| + | |||
| + | |||
| + | == Changes == | ||
| + | * Requires different Linux installation and kernel | ||
* Use -X -Y for ssh | * Use -X -Y for ssh | ||
| + | * DHCP | ||
Revision as of 18:45, 13 December 2010
Required Hardware
- 4GB SD card or larger (To write the Satellite CCRMA software image to the SD card, please see the relevant Appendix below.)
- One GT Max adjustable-length USB cable
- Ethernet cable
- 2A 5V switching power adaptor
- Solderless breadboard
Changes
- Requires different Linux installation and kernel
- Use -X -Y for ssh
- DHCP
